9 Reasons For Angel Wing Begonia Dropping Leaves & Fixes

Is your Angel Wing Begonia Dropping Leaves?

If you want an area or a space inside your home to emit liveliness and elegance, add angel wing begonia as a countertop or floor potted plant. This will even leave observers or your visitors speechless and marveled at.

OUR LATEST VIDEOS

What Causes Pothos Yellow Leaves [1...
What Causes Pothos Yellow Leaves [11 Reasons], How To Fix Pothos Yellow Leaves _ #PothosCare Guide

Cultivating an angel wing begonia is a lot of fun, however, it could very well be a headache for certain home growers, particularly as begonia dropping leaves begins to drop. In the vast majority of occurrences, the underlying reason for this is both curable and avoidable.

This article is for you if your attractive angel wing begonia has unexpectedly begun to shed leaves.

  • Why Are The Foliage On My Angel Wing Begonia Falling?
  • Why Angel Wing Begonia Dropping Leaves After Transplant
  • What Is The Cause Of The Death Of My Angel Wing Begonia?
  • Angel Wing Begonia Leaves Turning Brown
  • How to Rejuvenate Your Angel Wing Begonia If It Has Become Distressed
  • Begonia Leaf Problem
  • Angel Wing Begonia Care
  • Angel Wing Begonia Propagation
  • Common Pests Of Angel Wing Begonia

Why Are The Foliage On My Angel Wing Begonia Falling?

1. Repotting Done Wrong

Although most people don’t consider it, this is indeed a typical trigger for your begonia’s foliage to fall off.

  • Adjusting the soil of your begonia, especially during the hibernating or winter period, can cause significant harm, such as yellow foliage, discolored spots, and your begonia losing leaves.
  • Poor repotting includes the use of the unsuitable pot dimensions, the utterly wrong scheduling of repotting, and the uneven distribution of your begonia’s roots inside the pot.
  • Pots that are too tiny or too huge, on the other hand, might also have negative consequences.
  • If your begonia outgrows its present container, get a bigger one and only repot during the early warm months (spring).

Replant your angel wing begonia only if really required because it prefers to be somewhat pot-bound.

2. Infestation of Worms 

Cutworms are by far the most widespread angel wing begonia parasites.

  • Throughout the daytime, these parasites like to lay beneath dirt or debris, and at nightfall, they will prey on your plant’s leaf.
  • These worms will invade your cherished plants at a certain time in their development phase, as awful as it is. These worms will prey on your begonia gradually, usually beginning with the branch, and obstructions and nutrient transfer.
  • They then devour the leaves, removing water content and other elements. If necessary, separate your begonia to discourage these worms from spreading.
  •  Worms can be found underneath the foliage and even in the soil of your begonia’s, so constantly check out for them. Clean your begonia frequently, and any worms found should be removed as soon as possible.

3. Overwatering

As much as your angel wing begonia appreciates being sprayed with water, excess of it will be harmful. As a result, if you shower your beautiful plant more often than 7 days, it will begin to lose its foliage.

However, It’s not sufficient to water your begonia just once per week; regular watering is required. Unequal water circulation or inconsistent watering are additional issues.

You should water your angel wing begonia just when the upper two to three inches of its soil feel dry or your begonia’s foliage appear slightly dry to prevent this problem.

Why Angel Wing Begonia Dropping Leaves After Transplant

Angel wing begonia is not a transplant-friendly plant. After being repotted, your angel wing begonia can quickly wilt. Wilting appears 24 to 48 hours after your begonia has been repotted.

Angel Wing Begonia Dropping Leaves
Angel Wing Begonia Dropping Leaves
  • Since repotting strains your begonia, it is necessary to maintain it shaded over a period of time.
  • Repotting your angel wing begonia to a significantly larger container than it was formerly in increases the risk of transplant stress.
  • If just single foliage wilts on your begonia, don’t be frightened; root injury is the most likely cause. However, If it is an entire angel wing begonia leaf drop, you should be concerned.
  • By avoiding harm to your begonia roots when removing your plant from its original container, your plant avoids transplant shock. Make as little disruption to the roots as doable.

What Is The Cause Of The Death Of My Angel Wing Begonia?

1. Diseases

  • Your angel wing begonia will grow brown or black foliage quickly and shrivel due to infections.
  • Your begonia plant dying is also a result of Bacterial Diseases. Considering the fact that angel wing begonia isn’t especially disease-resistant, this is something you’ll want to keep an eye on.
  • The disease might develop in your angel wing begonia as a result of extreme wetness, adaptation, overwatering, or climate changes.
  • Furthermore, when your begonia is distressed, diseases are very likely to occur.

Although it is quite odd, the best beneficial remedy is to prune the diseased foliage as soon as possible.

2. Adaptation

Angel wing begonia can sometimes be notoriously difficult to care for when initially brought home. Angel wing begonia is known to produce a lot of browned foliage, wilt, as well as face challenges for several weeks until they adjust to their new surroundings.

Your angel wing begonia roots could be shocked following the tension of the relocation, and if you overwater your begonia during the initial few days, they can succumb to root rot.

Choose angel wing begonias that are in good health from the shop, then gently bring your begonia home.

After you bring them home, attempt to create an optimum environment for them by keeping the temperature, lighting, and moisture levels in the midpoint of their preferred ranges. Fulfilling these will help you avoid your begonia dying.

Angel Wing Begonia Leaves Turning Brown

1. Low Humidity

Your angel wing begonia leaves turning brown with margins due to low moisture doesn’t generally mean your whole begonia is unhealthy.

Angel wing begonia thrive better if the moisture content is maintained at approximately 40%, however if the temperatures are all too dry, they might generate brown leaf edges.

If you reside in a dry climate or when the moisture in your house is extremely low, consider one of the below methods to increase moisture levels.

  • The best efficient solution is to make use of a humidifier to keep the environment moist. Although, you must fill the humidifier using water each day or two.
  • Place your angel wing begonia inside an area with a increased humidity. Humidity levels are higher in kitchens as well as bathrooms.

2. Excessive Sun Exposure

In intense sunshine, angel wing begonia functions horribly, also, intense sun exposure will cause your begonia leaf tips to turn brown and also scorch them. Your angel wing begonia prefers to grow in the shade.

Browning appears rapidly on fully impacted begonia leaves, beginning as a soft nearly steamed brown then progressing to dry and crunchy. Sunburned angel wing begonia foliage is discolored with brown spots, in contrast to water-related concerns.

Simply move your angel wing begonia to a dodgier area as the first measure. Southern-facing shutters (windows), as well as those with no covers or curtains, should be avoided.

How to Rejuvenate Your Angel Wing Begonia If It Has Become Distressed

For Leggy Stems Distress;

If your angel Wing Begonia does not receive sufficient exposure, it will grow leggy. Positioning your begonia in a low-light environment will make it extend its branches to reach the source of light.

Your leggy development in angel wing begonia may be corrected through two strategies: by vigorous trimming or by propagating branches. Both strategies will promote fresh development and help your begonia to become bushier.

It’s advisable to propagate your begonia branches to develop fresh plants if your angel wing begonia has extended out to the point of looking like a wooden stick.

Since your plant’s roots essentially have been developed, trimming your begonia to a reduced length and width may result in a bushier form sooner.

For Overwatered Begonia Distress;

The begonia brown spots on leaves of an overwatered begonia are a dead giveaway. Your angel wing begonia prefers damp soil but not being submerged in water. Allowing moisture to evaporate between watering is essential.

  • Use a container with a couple of outlet openings to prevent overwatering your Begonia.
  • Lift your Begonia off from your container carefully to assess your plant’s soil as well as its root health at the base.
  • If somehow your soil base appears and feels wet, the issue is likely to be inadequate container outflow, inadequate soil oxygenation, or excessive watering.

Begonia Leaf Problem

1. Powdery Mildew

Powdery mildew is a prominent begonia condition with the following symptoms; greasy patches appearing on the undersides of affected leaves and powdery, whitish patches appearing on both the bottom and top surface of your begonia leaf.

Powdery mildew is due to a fungus, Erysiphe cichoracearum. This fungus prefers damp, shaded environments with temperate climates.

The spores of the fungus propagate both via the water and the atmosphere. Even a little infestation can still do major harm to a begonia plant.

2. Bacterial Leaf Spot

  • This bacteria may be found in both living and angel wing begonia dying foliage, and it grows best at conditions between 80 and 90°F.
  • Excessive wetness is usually the source of bacterial leaf spot, Xanthomonas campestris, one of the main severe and widely transmitted begonia infections.
  • Initially, tiny, blister-like developments on the lower part of your begonia leaves along the major veins are the first indication of bacterial leaf spot.
  • With time, these patches get more brownish, and if treatment is delayed, your begonia eventually loses its leaves, ultimately it will die.

Angel Wing Begonia Care step by step

What you ought to understand concerning angel wing begonia upkeep is listed below.

1. Temperature Requirements

Angel wing begonia may be grown inside the garden in USDA areas 8b to 11, however it’s preferable to keep it inside a container. Avoid abrupt temperature changes and drafts, which can be both hot and chilly.

Intense temperatures might well be damaging to your plant, then you may start noticing that your angel wing begonia development is hindered when the temperature drops under 13°C (55°F) or rises over 30°C (86°F).

Angel wing begonias prefer a temperature range of 18 to 23°C (65 to 75°F) to thrive inside. This is a good range for most households, and you could easily plant begonias inside a workplace. Temperatures under 10°C (50°F) can destroy this tropical shrub.

2. Light Requirements

An area having east or west sunlight is good for growing your angel wing begonias. This will guarantee that your angel wing begonia has sufficient lighting all through the daytime.

Your angel wing begonia may also be kept in an area having southern sunlight as long as it is at least 36 inches apart from the window. Avoid exposing your plant to full sun exposure, as this can result in burned leaves.

3. Soil Requirements

Angel wing begonia thrives on a mild, exposed to the air, moisture-retaining, and organic-rich soil combination. Peat moss, humus, perlite, or vermiculite, and a small amount of sand are a great combination to test.

This will offer your angel wing begonia a humid medium, also aid against overwatering by enabling moisture control, and supply your plant with the nourishment it requires to blossom.

3. Water Requirements

Angel wing begonia prefers equally wet soils, although root rot, as well as other fungal diseases, can be quite damaging.

You can do the finger test to check whether your plant wants extra water instead of watering it on a routine to retain it alive.

Whenever the upper layer of the soil seems dried or parched to your fingers, give water to your angel wing begonia. Begonia brown tips and indicate that your begonia is dehydrated or parched.

Steps for Angel Wing Begonia Propagation

Stem cuttings are the simplest and most successful approach to reproduce your angel wing begonia. This strategy is best used during the spring, while the plant is just beginning to develop. What you must do is as follows;

  1. To begin, use wiping alcohol to sterilize a set of scissors.
  1. Choose a shoot with no flower buds on it. The branch you choose has to be at minimum of  2 to 3 inches in length, and also must possess at least a couple of leaves.
  1. Now, clip the branch just above the developing node.
  1. Load your pot halfway with a medium that drains properly. Stem rot may be a major problem with begonia clippings. It is advisable to utilize 2:1:1 combination of sand, peat moss and perlite respectively to counteract this.
  1. Water gently after placing your clipping inside the potting medium. To assist preserve moisture, place your pot within a warm location out of bright exposure and wrap it using a clear plastic bag.
  1. For the following several days, water the clipping sparingly until it establishes a root development. The possibility of stem rot would also be reduced.
  1. Around 30 to 50 days, your angel wing begonia clipping ought to be rooted and ready to flower the very next season.

Common Pests Of Angel Wing Begonia

Although it is not extremely challenging to cultivate an angel wing begonia, it is occasionally bothered by bugs.

Mealybugs

When you notice a cottony look on your angel wing begonia, it is very likely to be caused by mealybugs. Mealybugs are little bugs that can congregate in great numbers, giving an area on your angel wing begonia a cottony look.

The main locations that these bugs prey largely on your angel wing begonia include; at the junctions of the leaves and branches, on the lower leaf surface and occasionally on the base(root) of your angel wing begonia.

Getting rid of mealybugs through pesticides is frequently ineffective against them because they (mealybugs) have a waxy layer that is shielding them.

Using horticultural oils and insecticide soap applications are less dangerous and more efficient in getting rid of these little bugs than pesticides. However, on a regular basis, you must keep reapplying the oils and soap.

Whiteflies

Large whiteflies, a type of flying insect that produces a waxy residue on the foliage of your angel wing begonia, can be found on your potted plant occasionally.

The use of sticky traps might help to control their numbers on your plant. Also, insecticidal soap spray applied to your whole plant is frequently successful in stopping them.

Whiteflies are impossible to stop using pesticides, thus prevention is essential. As dusty circumstances usually draw whiteflies, you can avoid them by making sure your angel wing begonia are often not drought-stressed.

Furthermore, pesticides destroy helpful, predatory bugs like lacewings as well as pirate bugs, which help to maintain whiteflies in check.

Angel Wing Begonia Dropping Leaves FAQS

Q: Why Are My Angel Wing Begonia Leaves Crispy?

Dehydration is the most predominant trigger of crisping leaves in angel wing begonias.

Q: Should I Cut Off Damaged Begonia Leaves?

Yes. Remove any dead leaves or branches by pinching or cutting them off.

Q: Why Are The Foliage Of My Angel Wing Begonia Bending?

Curling angel wing begonia foliage could develop when your begonia is subjected to extreme temperature shifts.

Q: What Is Causing The Yellowing Of My Angel Wing Begonia Foliage?

Overwatering is still most probably the cause of yellow foliage on your Begonia.

Conclusion

Angel Wings Begonia is probably of the most straightforward Begonias to cultivate domestically. However, any garden owner might easily take this tough plant for reserved or granted and overlook its necessities.

This guide has discussed a few of the most typical signs and indications of angel wing begonia dropping leaves, as well as things you can do to help it recover.

If you meet the needs of this Begonia, it would brighten up your space with its fascinating speckled leaf.